Lucent Technologies MERLIN Plus Release 2 System Manual page 275

Tones
DESCRIPTION
5-156 MERLIN Plus System Features
Your MERLIN Plus system and your voice terminal provide the following tones
to inform you of the progress of a call you are placing or are about to place.
There are also tones that let you know you are in administration or programming
mode and a tone to tell you that your voice terminal is working satisfactorily.
Feedback
Steady tone
Dial tone
A slow pulsed tone
Busy tone
Voice signal A beep
tone
Dialing For Touch-Tone lines a series of
feedback tones
For rotary lines a series of rotary
pulses
A ringing sound
Ringing tone
Testing A steady ringing sound
feedback
Feedback
Programming Your voice terminal rings every
reminder 5 seconds to remind you that you
can't place or receive calls.
Error/Deny tone One beep
Two beeps
Confirmation
tone
Hold Reminder One beep every minute
Sound
You can begin dialing when you
are ready.
The line is busy.
You can announce the call through
the other person's voice terminal
speaker.
You have dialed another digit of
the telephone number.
The call is ringing at the other
person's phone.
Your MERLIN Plus system has
been installed correctly.
Meaning of the Feedback
Sound
You are in programming mode and
cannot place or receive calls.
You have made an error in
administration and should try the
step again.
The administration feature has
been entered into the system.
You have a call on hold.
Meaning of the Feedback