Lucent Technologies MERLIN Plus Release 2 System Manual page 218

Message
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
When the light next to the Message button is on, your MERLIN Plus system
attendant has a message for you.
Your Message light can only be turned on from the administrator/attendant
console.
If the attendant is using a BIS-22 and the system has more than 10 voice
terminals, refer to "Send Message" for directions on sending a message to
voice terminals in the system.
5-button voice terminals do not have a Message button.
None
None
The system attendant can touch Message to turn on the light next to the
Message button at a person's voice terminal.
At the administrator/attendant console, touch Send Message.
1
Touch the Auto Intercom button for the person's voice terminal.
2
The red light next to the Auto Intercom button goes on, indicating the person's light is lit.
Send
Message
A person can turn off the Message light on his or her voice terminal. The system
attendant can also turn off the light at a voice terminal by repeating
the two steps above.
Susan 15
MERLIN Plus System Features 5-99