Lucent Technologies MERLIN Plus Release 2 System Manual page 102

Administration Procedure
Change the password for the CF or RLA feature.
Designate the number of rings before a call will
be answered by ASA features.
Modify the voice message for one or more lines
in your CF, RLA, SA or DXD incoming line
groups.
Enter or change the telephone number to which
you want calls forwarded.
Set the Call Forwarding/Remote Line Access
Disconnect Timer interval for systems where no
forward disconnect signal is provided by the
Central office.
3-46 Quick Reference Guide to System Administration
1 Enter administration mode.
2 Dial *56.
3
Dial an intercom number plus three digits.
To invalidate any password, dial the intercom number and 000.
NOTE:
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *76.
3 Dial the number that corresponds to the ASA feature you've selected:
1 = DXD
2 = CF
3 = RLA
4 = SA
4 Dial 0-9 (for the number of rings).
5 Touch Administer.
The console beeps twice.
6 Leave administration mode.
1 Enter administration mode.
2 Dial *50.
3 Touch the line button(s) for the line(s) on which you want to modify the
message.
4 Dial the telephone number you want to include in the message.
5 Touch Administer.
The console beeps twice.
6 Leave administration mode.
1 Enter administration mode.
2 Dial *53.
3
Dial the new CF destination telephone number.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *68.
3
Dial the desired value (must be 3 digits).
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
Do This
(continued)