Lucent Technologies MERLIN Plus Release 2 System Manual page 282

Voice Announcement Enable/Disable
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
Ordinarily, people can use the MERLIN Plus system
announce calls through your voice terminal speaker.
want a voice announcement to interrupt your work, you can use the Voice
Announcement Disable feature to have intercom calls ring at your voice terminal
instead.
If someone in the MERLIN plus system has the Voice Announcement Disable
feature programmed for his or her voice terminal, he or she cannot hear a
Group Page announcement.
If you use the Voice Announcement Disable feature on a voice terminal with
HFAI, you deactivate the HFAI feature. However, the Voice Announcement
Disable feature does not affect voice terminals with connected hands-free units
and with the Auto Answer-All feature activated.
You must program Voice Announcement Disable on your telephone if you want
an answering machine to answer your intercom calls when you are not available.
None
To program the voice announcement option you prefer for your voice terminal:
Slide the T/P switch to P.
1
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch Intercom.
2
Dial one of the following codes to indicate that you want voice
3
announcements allowed or prevented at your voice terminal:
> If you want voice announcements allowed, dial *38.
The green light next to the Intercom button goes on.
> If you want voice announcements prevented, dial *39.
The green !ight next to the Intercom button goes off.
Slide the T/P switch to the
4
T P
Intercom
None
intercom feature to
center position.
T P
38 or 39
MERLIN Plus System Features
However, if you do not
5-163