Lucent Technologies MERLIN Plus Release 2 System Manual page 83

BUTTON-FREE LINE
OPERATION
If you selected Button-Free Line Operation, so that incoming lines on a voice
terminal are not assigned to buttons, you can administer whether or not calls
should ring at the voice terminal. If the voice terminal is in a public place,
such as a building lobby, you can select the no ring option.
If you circled "I" for Immediate Ring or "N" for No Ring on the Line
Assignments for Voice Terminals form, follow the procedure below:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Follow the appropriate procedure:
2
> Touch the Auto Intercom button for the voice terminal you're
administering.
The green light goes on.
> Dial the intercom number for the voice terminal you're administering.
Touch the line button until the green light shows the assignment you want:
3
Green light on =
Green light off =
To make the line Button Free, dial one of these two codes:
4
> Dial *31 if you want the voice terminal to ring.
The green light next to the Auto Intercom button flahes rapidly.
> Dial *32 if you do not want the voice terminal to ring.
The green light next to the Auto Intercom button flashes slowly.
Touch Administer.
5
The console beeps twice.
Continue with administration, or leave administration mode.
6
the line is assigned to the voice terminal
the line is not assigned to the voice terminal
Line Assignments for Voice Terminals 3-27