Lucent Technologies MERLIN Plus Release 2 System Manual page 214

Loudspeaker Paging
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
This feature is used with an optional loudspeaker paging system and is
NOTE:
compatible with paging systems with talkback. Refer to "Loudspeaker
Paging System" under "Accessories" at the end of this section for more
information.
If you have a Loudspeaker Paging System connected to the MERLIN Plus
system, you can page people, make announcements, and provide background
music (if available) throughout the building.
You have two options:
You can connect the loudspeaker paging system to the Page Jack on the front
1
of the control unit.
You can connect the loudspeaker paging system to a CO (outside) line jack
2
on a line module and administer that jack as a paging port.
Refer to "Loudspeaker Paging System" under "Accessories" at the end
of this section.
Refer to "Loudspeaker Paging System" under "Accessories" at the end
of this section.
If your loudspeaker paging system is connected to the page jack on the control
unit, you can program a loudspeaker paging button to use instead of a dial code
whenever you want to page someone.
A button with lights is recommended for the Loudspeaker Page feature:
Label the button Loudspeaker Page.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch Loudspeaker Page.
3
Dial *91.
4
Dial 6.
5
Slide the T/P switch to the center position.
6
T P
Ldsp.
Page
T P
6
91
MERLIN Plus System Features
5-95