Lucent Technologies MERLIN Plus Release 2 System Manual page 229

5-110 MERLIN Plus System Features
From a BIS-10 Voice Terminal
If you are using a BIS-10 voice terminal, use the following procedure to program
a Personal Speed Dial sequence:
Slide the T/P switch to P.
1
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Dial a Personal Speed Dial code (#01 through #24).
2
Personal Speed Dial code #23 is preprogrammed for Saved Number
NOTE:
Dial and #24 is preprogrammed for Last Number Dial. You can
assign these Custom Calling features to different Personal Speed
Dial codes, using a slightly modified procedure. Here's how to
program Last Number Dial or Saved Number Dial onto Personal
Speed Dial code #01:
Slide the T/P switch to P.
a
Dial #01.
b
Dial *90.
c
Dial #01 again.
d
Dial *73 for Last Number Dial or *74 for Saved Number Dial.
e
Slide the T/P switch to the center position.
f
Dial *90 plus a telephone number or a PBX, Centrex, or Custom Calling
3
feature code. Follow the instructions above if you need to include a special
character in the dialing sequence.
Slide the T/P switch to the center position.
4
T P
#01-#24
From a BIS-22 Voice Terminal
If you are using a BIS-22 voice terminal,
a Personal Speed Dial sequence:
Slide the T/P switch to P.
1
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Dial a Personal Speed Dial code (#01 through #12).
2
Dial *90 plus a telephone number or a PBX, Centrex, or Custom Calling
3
feature code. Follow the instructions above if you need to include a special
character in the dialing sequence.
4 Slide the T/P switch to the center position.
T P
#01-#12
T P
tel. no.
90
use the following procedure to program
T P
tel. no.
90