Lucent Technologies MERLIN Plus Release 2 System Manual page 273

Test
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
5-154 MERLIN Plus System Features
When you need to test the lights and the ringing on your voice terminal, or if you
need to verify that your voice terminal has been installed correctly, you can use
the Test/Program (T/P) switch on the left side of your voice terminal.
If your system administrator has administered the Program Mode Lock feature
for your voice terminal, you cannot use the T/P switch for changing programmed
features at the voice terminal. However, you can still use the T/P switch for
testing voice terminal lights and ringing.
None
None
To test the lights and ringing on your voice terminal:
Slide the T/P switch to T. On some voice terminal models you must hold the
1
switch in that position until you are finished testing your voice terminal.
The red and green lights next to your voice terminal buttons flash alternately, and your voice
terminal rings.
Slide the T/P switch to the center position.
2
If your voice terminal does not respond when you slide the Test/Program switch
to T, check Section 7, "Troubleshooting the System," for possible causes and
recommended action.
T P T P