Lucent Technologies MERLIN Plus Release 2 System Manual page 332

Automatic Line Selection, 5-18 — 5-19, 5-88, 5-168
sequence, 2-14, 3-25
with Button-Free line operation, 5-28
with basic telephone, 6-6
with copy, 5-54
Automatic System Access, 5-20, 5-21, 5-142
Call Forwarding, 5-91, 5-101
Direct Extension Dialing, 5-91
on System Configuration Form, 2-6
Remote Line Access, 5-91
System Answer, 5-91
using with dial codes, 3-6
auxiliary jack, 5-22, 6-4
auxiliary lines, 5-22 — 5-23
using basic telephones, 5-22
using facsimile machines, 5-22
using modems, 5-22
with Privacy (on lines A and E), 5-114
B
Background Music, 3-13, 5-95, 6-19, 6-21 — 6-22
set volume, 3-13, 3-48, 3-42, 6-22
turn off, 3-48
basic administration 3-10 — 3-23
basic telephone, 6-4 — 6-6, 6-8
and Modem Interface, 6-4
arid Modem Interface 2, 6-7 — 6-8
with auxiliary lines, 5-22
BIS speakerphone, using, 4-10
BIS voice terminal, 5-15
BIS-10 voice terminal, 1-7
description of, 1-8
limited use as attendant console, 4-1
not recommended as console, 3-7
BIS-22 voice terminal, 1-7
labels for, 3-8
as administrator/attendant console, 3-5
as attendant console, 4-1, 4-3
administration restrictions, 3-3
administration with, 3-3
description of, 1-8
using with Send Message, 5-132
with Message, 5-99
BIS-22D voice terminal with display, description of, 1-8
BIS-34 voice terminal, 1-7, 3-3
labels for, 3-8
with Night Service, 4-8, 5-101
description of, 1-8, 1-9
as attendant console, 3-4, 4-1, 4-2
with display, 1-7, 3-3, 5-66
bridging, 5-24
Busy Buster, 5-25 — 5-27, 5-89, 5-103, 5-167, 5-171
administering jack assignment, 3-15
designating a voice terminal jack for, 3-44
jack, 5-25
set control unit jack for, 3-48
unable to use, 7-9
jack 19 reserved for, 2-6
busy tone, 5-156
button functions change for administration, 3-3
button label sheets for-the administrator/attendant console, 3-7
Button-Free feature, with copy, 5-54
I-2 Index
Button-Free line operation, 2-14, 3-38, 5-28, 5-30
cannot be bridged, 5-24, 5-28
cannot use conference with, 5-28
reassigning lines, 3-48
setting immediate ring on a line, 3-48
setting no ring on a line, 3-48
with conference, 5-52
with hold retrieve, 5-85
C
Call Forwarding, 5-31 — 5-38
See also CF/DXD.
after-hours use, 4-8
Call Forwarding/Remote Line Access Disconnect Timer, 5-39
Call Pickup, 5-40 — 5-42, 5-101, 5-166, 5-171
button, 4-8, 5-101
using a Call Pickup button, 5-40
using a dial code for, 5-40
using a One-Touch Call Pickup button, 5-40
with customized line assignments, 5-56
with One Touch, 5-171
Call Report, 2-23 — 2-24, 3-12, 5-43 — 5-47, 5-167, 6-9
account number entry, 5-43
administering jack assignment, 3-15
control unit jack assignment, 5-46
designating jack, 3-43
general method of entering an account number, 5-3
maximum number of characters available for
account number entry, 5-3
minimum call duration, 3-12, 5-46
not printing a number, 3-41
printout of, 5-43
quick method of entering an account number, 5-3
report call duration, 5-44
report outgoing and incoming calls, 5-44
report outgoing calls only, 5-44
set control unit jack, 3-50
set minimum call duration, 3-43, 3-50
set type of calls printed, 3-50
setting calls reported option, 3-43
setting date, 3-42, 3-50, 5-45
setting time, 3-42, 3-50, 5-45
settings on System Feature Report, 5-142
System Speed Dial codes with, 5-44
type of calls documented, 5-47
voice terminal jack 19 reserved for, 2-7
with account number entry, 5-3 — 5-5
with System Speed Dial, 5-152
call restriction, 3-39, 5-6, 5-48 — 5-49, 7-2
automatic reset, 5-17
outward call restriction, 5-48
reset, 5-48
toll call restriction, 5-48
and Allowed Lists Forms, 5-8
assigning to voice terminals, 3-33
Call Restriction Assignment Form, 2-31 — 2-33