Lucent Technologies MERLIN Plus Release 2 System Manual page 130

Auto Answer-All
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
This feature requires a General Purpose Adapter and can be used with a
NOTE:
modem, an answering machine, a facsimile machine, or a cordless
telephone.
If you want an optional piece of equipment, such as a modem, an answering
machine, or a facsimile machine, connected to your voice terminal, to turn on
automatically when you receive ringing calls, you need to program an
Auto Answer-All button.
You cannot have both the Auto Answer-All and Auto Answer-Intercom features
activated at the same time. If you have a Hands-Free Unit (HFU) and
Auto Answer-All is activated, all incoming calls will be answered at once.
This feature only answers ringing incoming calls. It will not answer voice
announced calls. You should program Voice Announcement Disable on your
voice terminal if you want all your incoming calls to ring. (See "Voice
Announcement Enable/Disable" later in this section for more information.)
None
Program the Auto Answer-All feature on a button with lights.
To program an Auto Answer-All button for your voice terminal:
Label the button Auto Answer-All.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *75.
4
Slide the T/P switch to the center position.
5
T P
Auto Ans.-
All
T P
75
MERLIN Plus System Features 5-11