Lucent Technologies MERLIN Plus Release 2 System Manual page 189

Do Not Disturb (DND)
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
5-70 MERLIN Plus System Features
When you are busy and do not want to receive calls, you can touch the
Do Not Disturb button, if you have programmed one onto your voice terminal.
When you receive outside calls, the green light next to the line button flashes,
but your voice terminal does not ring.
Calls transferred to you return to the sender, and intercom calls get a busy signal.
When you activate the Do Not Disturb at your voice terminal, the green light
goes on next to your Auto Intercom button at other people's voice terminals.
Calls you transfer will return to you if they are unanswered.
None
None
The Do Not Disturb feature requires a button with lights.
To program a Do Not Disturb button for your voice terminal:
Label the button Do Not Disturb.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *71.
4
Slide the T/P switch to the center position.
5
T P
Do Not
Disturb
T P
71