Lucent Technologies MERLIN Plus Release 2 System Manual page 115

USING THE SEND
MESSAGE FEATURE
When someone in the MERLIN PI
Message light at the person's voice terminal to indicate that there is a message
waiting.
1 Touch Send Message.
2 Touch an Auto Intercom button, if you have one for the person.
or
Dial the 3-character dial code opposite the person's intercom number as
found on the following table.
S e n d
Message
If the intercom
number is:
Intercom 10
Intercom 11
Intercom 12
Intercom 13
Intercom 14
Intercom 15
Intercom 16
Intercom 17
Intercom 18
Intercom 19
For example, if you want to turn on the Message light at Intercom 24, but do not
have an Auto Intercom button for that person, look for Intercom 24 on the table
above. Opposite Intercom 24 you will find the Send Message dial code, #07.
Then you would touch Send Message and dial #07 to send the message.
To turn off the message light, repeat the steps.
S e n d
Message
system has a message, you can turn on the
US
Susan 15
If the intercom
Dial this code: number is:
#22 Intercom 20
#21 Intercom 21
#20 Intercom 22
#19 Intercom 23
#18 Intercom 24
#17
Intercom 25
#16 Intercom 26
#15
Intercom 27
#14 Intercom 28
#13
Intercom 29
#03-#22
Dial this code:
#03
#04
#05
#06
#07
#08
#09
#10
#11
#12
Handling Calls 4-7