Systemwide Options - Lucent Technologies MERLIN Plus Release 2 System Manual

Systemwide Options

CALL RESTRICTIONS TO
VOICE TERMINALS
DISALLOWED LIST
ALLOWED LISTS
Now that your MERLIN Plus system is up and running, you can continue with
system administration at a pace that best suits your work schedule. Under this
heading you'll find a menu of options and features from which to choose.
When your system is first installed, all voice terminals are unrestricted.
The Call Restrictions Assignment Form should show whether you plan to restrict
any of your voice terminals or assign Disallowed or Allowed Lists.
If you plan to prevent all or some voice terminals from making billable calls,
you should have filled in one or more entries on the Disallowed List Entry Form
and put a check next to each voice terminal being assigned the Disallowed List
on the Call Restrictions Assignment Form.
Use the following procedure to setup a Disallowed List:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *09 followed by the Disallowed List code (01 through 20).
Dial the disallowed number (up to 16 digits). If the number includes
2
wild card digits, touch Hold once for each one.
Touch Administer.
3
The console beeps twice.
Continue to administer the system, or leave administration mode.
4
If you plan to create lists of numbers that restricted voice terminals are allowed
to call, you should have filled in one or more of the lists on the Allowed List
Entry Form. As the directory shows, you can have up to eight Allowed Lists
with up to 10 entries on each list.
To setup an Allowed List:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial a * and a 2-digit code (01 through 08) that corresponds to the number of
the list.
Dial the 2-digit number of the item in the Allowed List (between 01 and 10).
2
Dial the allowed number, toll-prefix, and area code, if necessary, or exchange
3
to be added to the list (maximum eight digits).
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
Systemwide Options 3-33