Lucent Technologies MERLIN Plus Release 2 System Manual page 129

PROGRAMMING
HOW TO USE
5-10 MERLIN Plus System Features
If you will be using the System Answer feature, see "System Answer" later in
this section, you must program the SA button. Only the attendant or the alternate
attendant can have the SA button.
Label the button "System Answer."
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *58.
4
Slide the T/P switch to the center position.
5
T P
System
Answer
To activate System Answer from the
Touch System Answer.
1
Green light flashing
System
Answer
If the green light next to the System Answer button is flashing, notify the system
administrator who should refer to Section 7, "Troubleshooting," to correct the
problem.
T P
5 8
Alternate Attendant position:
Green light on = SA on
Green light off = SA off
= Problem with SA