Lucent Technologies MERLIN Plus Release 2 System Manual page 81

CUSTOMIZED LINE
ASSIGNMENTS
On the Line Assignments form, the numbers 1 through 8 on the top row to the
right of the intercom numbers should show how you plan to customize the line
assignments to voice terminals.
Customizing a voice terminal's line assignments is simply a matter of removing
and adding lines. But keep the following points in mind:
On every voice terminal (except a 5-button model), the button directly above
Conference is always the Intercom button. You can't assign a line
or feature to it.
On every voice terminal (except a 5-button model), the button above
Transfer is always a programmable feature button. You can't assign
a line to it.
When you assign lines to a voice terminal, the system assigns them to line
buttons in the order shown in Figure 3-8 below. This sequence is also the
voice terminal's automatic line selection sequence—the order in which the
system selects lines for the voice terminal's outgoing calls—unless you
program a different automatic line selection sequence.
On any voice terminal, line buttons without lines assigned to them can have
feature buttons programmed on them.
FIGURE 3-8 The order in which the system assigns lines to buttons.
Conference
4
3
2
1
Intercom
Transfer
D r o p H o l d
Line Assignments for Voice Terminals
8
7
6
5
3-25