Saved Number Dial - Lucent Technologies MERLIN Plus Release 2 System Manual

Saved Number Dial

DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
5-130 MERLIN Plus System Features
If you have programmed a Saved Number Dial button, you can use the button to
save an important number for one-touch dialing at a later time. If the number
you call is busy or no one answers, or if you need to call the person back, you
can save that number by touching Saved Number before you hang up. Later,
when you touch Saved Number again, your voice terminal automatically redials
the number you have saved.
You can program more than one Saved Number Dial button for your voice
terminal, so that, if necessary, you can save different calls during the day.
Be sure to write on a separate sheet of paper the identity of each person called
and/or telephone number for each Saved Number button.
You may prefer to use a dial code rather than program a button in order to use
the Saved Number Dial feature.
A Saved Number Dial button saves both manually dialed numbers and numbers
dialed with an Outside Auto Dial button, and numbers saved on a Last Number
Dial button.
None
To program a Saved Number Dial button for your voice terminal:
Label the button Saved Number.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *74 (you do not need to dial an outside number).
4
Slide the T/P switch to the center position.
5
T P
Saved
Number
T P
74