Lucent Technologies MERLIN Plus Release 2 System Manual page 105

Administration Code
*36
*37
*38
*39
*50
*51
*52
*53
*54
*56
*57
*58
*59
*60
*61
*62
*63
*68
*69
Other Numbers/Buttons
the line button(s) for the line(s) on
which you want the modified message
the telephone number you want to
include in the message
the line buttons of the lines you want
to add to or remove from the group
the line buttons of the lines you want
to add to or remove from the group
the new Call Forwarding destination
telephone number
the line buttons of the lines you want
to add to or remove from the group
the ASA password (a MERLIN Plus
system intercom number plus any three
digits)
line A or E only
the line buttons of the lines you want
to add to or remove from the group
the intercom number for the jack you
want to assign to ASA
an intercom number of the voice
terminal
three-digit timer interval
the outside line buttons
Feature
Set the system for toll prefix, a 0 or a 1
Set the system for area code only
Set the system for Touch-Tone dialing
Set the system for rotary dialing
Modify the Call Forwarding, Direct Extension Dialing,
Remote Line Access, or System Answer voice messages
for one or more lines in your CF, DXD, RLA, or SA
incoming line groups
Select lines that will be included in the Call Forwarding
incoming line group
Choose lines that will compose the Call Forwarding
outgoing line group
Enter or change the telephone number to which you want
calls forwarded
Select lines that will be included in the Remote Line
Access incoming line group
Choose at least one valid 5-digit password so that you can
gain access to an outside line using Remote Line Access or
change the current call forward number from a remote
location
Assign Privacy to Line A or E
Select lines that will compose the Direct Extension Dialing
incoming line group
Change the jack assignment of the ASA features from jack
18, the initial assignment
Print a System Feature Report for the system and for every
voice terminal in the system
Print a System Feature Report for the whole system
Print a System Feature Report for an individual voice
terminal
Cancel a System Feature Report in progress and
all report requests
Set the CF/RLA Disconnect Timer interval (if no forward
disconnect is provided by the Central Office)
Set Hold Disconnect Interval
Quick Reference Guide to Administration Codes
(continued)
3-49