Lucent Technologies MERLIN Plus Release 2 System Manual page 96

Administration Procedure
Add an entry to the Disallowed List.
Remove an entry from the Disallowed List.
Assign a Disallowed List to a voice terminal.
Copy line assignments, call restrictions, and
programmed features from one telephone
the source) to another (the target).
Change the Hold Disconnect Interval.
3-40 Quick Reference Guide to System Administration
1 Enter administration mode.
2 Dial "09 followed by the Disallowed List code (01 to 20).
3 Dial the disallowed number (up to 16 digits).
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Dial *09 and the Disallowed List code (01-20).
3 Touch Administer.
The console beeps twice.
4 Leave administration mode.
1 Enter administration mode.
2 Dial *09 then 00.
3 Touch the Auto Intercom or dial the appropriate intercom code number of the
voice terminal you want to assign the list to.
Green light on = list is assigned
Green light off = list is not assigned
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the target
voice terminal.
3 Touch Copy.
4 Touch the Auto Intercom button or dial the intercom number for the source
voice terminal.
5 Touch Administer.
The console beeps twice.
6 Leave administration mode.
1 Enter administration mode.
2 Dial *69.
3 Touch the line button of the incoming line that you want to change the hold
disconnect interval.
Green light on = the long (450 millisecond) interval is selected.
Green light off = the short (50 millisecond) interval is selected.
Do This
(continued)