Lucent Technologies MERLIN Plus Release 2 System Manual page 148

Touch the Auto Intercom button or dial the intercom number for the voice
2
terminal you are administering.
A green light goes on next to the Auto Intercom button. Green lights go on next to the buttons
of any lines already assigned to the voice terminal.
Touch the line button until the green light next to it shows the line
3
assignment you want:
Green light on = the line is assigned to the voice terminal
Green light off = the line is not assigned to the voice terminal
To make the line Button-Free, dial one of these two codes:
4
> Dial *31 if you want the voice terminal to ring.
The green light next to the Auto intercom button flashes rapidly.
> Dial *32 if you do not want the voice terminal to ring.
The green light next to the Auto Intercom button flashes slowly.
Touch Administer.
5
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
6
T P
Administer
Administer
To remove Button-Free Line Operation by reassigning lines to separate buttons
on a voice terminal:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Touch the Auto Intercom button for the voice terminal you are administering.
2
Dial *34.
3
A green light should go on next to the lines that have been assigned to the voice terminal.
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
Administer
Susan 15
T P
Susan 15
T P
MERLIN Plus System Features
555-1234
31 or 32
34
5-29