Lucent Technologies MERLIN Plus Release 2 System Manual page 311

PROGRAMMING
HOW TO USE
6-20 Accessory Equipment
Administration procedures for CO line connection:
Slide the T/P switch to P and touch Administer.
1
Dial *91
2
Touch the button for the line you want to be the paging port.
3
Green light on = line added to paging port
Green light off = line removed from paging port
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
Refer to "Loudspeaker Page" earlier in this section.
Using the Loudspeaker Paging System connected to the Page Jack:
To use the Loudspeaker Page button:
Touch Loudspeaker Page.
1
When you hear the beep, lift your handset and make your announcement.
2
To use this feature dialing a code:
Touch Intercom.
1
Lift your handset.
2
Dial 6.
3
When you hear the beep, make your announcement.
4
The loudspeaker will turn off automatically when you hang up.
Using the Loudspeaker Paging System connected to a CO Iine:
Touch the loudspeaker page's line button.
1
Follow the instructions provided with your loudspeaker page system.
2
If your loudspeaker page system provides a warning tone (beep), wait for the
3
tone before making your announcement.