Lucent Technologies MERLIN Plus Release 2 System Manual page 179

ADMINISTRATION
5-60 MERLIN Plus System Features
If your responsibilities do not include system administration, skip this
information.
DXD Line Groups
At startup, none of the system's outside lines are assigned to each ASA line
group. You need to assign which lines you want to designate for DXD.
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *58 for a DXD incoming line group.
2
Touch the line buttons until the green lights show the makeup you want for
3
the line group.
Green light on = line is assigned to the group
Green light off = line is not assigned to the group
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
T
Administer
Number of Rings
To change the number of rings (the default is two rings) before the DXD call is
answered:
Slide the T/P switch to P and touch Administer.
1
Dial *761 plus the number of rings (between 0 and 9) before call
2
is picked up.
If the number of rings is set to 0, the voice terminal will not ring,
NOTE:
and the calls will be answered immediately.
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
4
T P
Administer
555-1234
58
P
Administer
7610- 7619
T P