Lucent Technologies MERLIN Plus Release 2 System Manual page 166

PROGRAMMING
HOW TO USE
Type of Documented Calls
To specify the type of calls that will be documented (the system is set to have no
calls reported):
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *84.
2
Dial a number code 0 through 2 to specify the kind of calls to be reported
3
(the system is factory-set so that no calls are reported):
> If you do not want any calls reported, dial 0.
> If you want only outgoing calls reported, dial 1.
> If you want outgoing and incoming calls reported, dial 2.
Touch Administer.
4
The console beeps twice.
Leave administration mode
5
T P
Administer
None
None
by sliding the T/P switch to the center position.
84 0-2
MERLIN Plus System Features
T P
Administer
5-47