Lucent Technologies MERLIN Plus Release 2 System Manual page 153

5-34 MERLIN Plus System Features
Voice Messages
The system automatically provides the following default voice message for call
forwarded calls:
"Your call is being forwarded. Please hold."
You can modify this message to include the following statement:
where nnn... is the telephone number of one of your outside lines. The number
can be up to 16 digits, including * or #. You can modify the message for all lines
in an incoming line group, or you can modify the message for some and leave
others unmodified. To modify the CF message for one or more lines in your
incoming line groups, do the following:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *50.
2
Touch the line button for the line on which you want the modified message.
3
The green light goes on.
Dial the telephone number you want to include in the message.
4
For special phone numbers, such as an 800 number, you may prefer
NOTE:
to have the recorded voice say "Eight hundred" followed by the
number, instead of "Eight, zero, zero." In this case, you would touch
the Hold button to enter a pause after the toll prefix, then again after
the 800 area code, and again after the exchange. For example,
1-800-555-1212 would be entered as follows:
Repeat for other lines.
5
Touch Administer.
6
The console beeps twice.
Leave administration mode by sliding the T/P switch to
7
T P
Administer
Administer
To return to the message provided with the system:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *50.
2
"You have reached nnn..."
1 Hold 800 Hold 555 Hold 1212
50
T P
the center position.
555-1234
CF no.