Lucent Technologies MERLIN Plus Release 2 System Manual page 248

PROGRAMMING
HOW TO USE
To program the line ringing option you prefer:
Slide the T/P switch to P.
1
Touch the line button for which you want to program immediate, delayed, or
2
no ringing.
Dial one of these codes for the type of ringing you want the line to have:
3
> Dial *35 for no ring.
The red light next to the line button goes off.
> Dial *36 for delayed ring.
The red light next to the line button flashes.
> Dial *37 for immediate ring.
The red light next to the line button goes on steady.
Repeat steps 2 and 3 for each line button you want to program.
4
When you are finished programming, slide the T/P switch to the center
5
position.
T P
555-1234
Even if you program the lines on your voice terminal not to ring, you can tell if a
call comes in for you because the 'green light next to the line button still flashes.
To answer the call:
Touch the line button next to the flashing green light.
1
Touch Speakerphone or lift your handset.
2
555-1234
T P
35- 37
Speaker-
phone
MERLIN Plus System Features
5-129