Lucent Technologies MERLIN Plus Release 2 System Manual page 234

Program
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
By using the Test/Program switch and following the instructions listed below,
you can program features that you have selected for your voice terminal onto
available buttons.
There are several programmable features that you can use with either a button or
a dial code. Therefore, if you have a limited number of available feature buttons
on your BIS-10 or BIS-22 voice terminal, you may choose to use a dial code
rather than program any of those features onto your voice terminal.
If you make a mistake when programming a button, simply touch the button
again and redial the programming code and all required numbers.
The system administrator can use the Program Mode Lock feature to prevent
people within the system from changing programming assignments on their
voice terminals. (See "Program Mode Lock.")
The system administrator can program features onto individual voice terminals
by using the Centralized Programming feature. (See "Centralized
Programming.")
Individual feature programming codes are provided in programming instructions
in the reference description for each programmable feature and in Section 6,
"Quick Reference Guides."
To program a feature onto your voice terminal:
Type or print on the button label strips all the names of the features you want
1
to program. Then insert the labels into the appropriate slots on your
voice terminal.
Slide the T/P (Test/Program) switch on the left side of the voice terminal to
2
the P (Program) position.
The green lights next to the buttons begin flashing.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Consult the programming instructions in the specific feature's entry in this
3
section or use the codes listed in the "Quick Reference Guides" at the end of
this section to determine the feature's programming code. (You can also refer
to the MERLIN Plus System User's Guide for programming codes.)
MERLIN Plus System Features 5-115