Lucent Technologies MERLIN Plus Release 2 System Manual page 94

Administration Procedure
Make Line A and/or Line E Private.
Customize line assignments to a telephone.
Specify number of lines in the system
Assign Button-Free Line Operation to a
telephone.
3-38 Quick Reference Guide to System Administration
1 Enter administration mode.
2 Dial * 57. The green lights next to the buttons for Line A and Line E indicate
their status:
Green light on = privacy active
Green light off = privacy inactive
3 Touch the line button until the green light indicates the privacy status you
want.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the phone.
3 Touch the line buttons to add or remove lines. Add the lines in the order that
they should appear.
Green light on = line is assigned
Green light off = line is not assigned
4 Leave administration mode.
1 Enter administration mode.
2 Dial *4.
3 Dial the number of lines in the system (1-8).
4 Touch Administer.
The console beeps twice.
5 Leave administration mode.
1 Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the phone.
3 Touch the line button until the green light next to it shows the line
assignment you want:
Green fight on = the line is assigned to the voice terminal
Green light off = the line is not assigned to the voice terminal
4 Dial either *31 if you want the phone to ring on incoming calls or *32 if you
don't want it to ring.
5 Touch Administer.
The console beeps twice.
6 Leave administration mode.
To make all outside lines reappear on the voice terminal, enter
NOTE:
administration mode, touch the Auto Intercom button or dial the
intercom number of the phone, dial *34, touch Administer, and leave
administration mode.
Do This
(continued)