Lucent Technologies MERLIN Plus Release 2 System Manual page 186

ADMINISTRATION
PROGRAMMING
HOW TO USE
None
None
To use the four features associated with the display unit, follow the instructions
on the next few pages.
Received Call ID
When you receive an intercom call, the 2-digit intercom number of the person
calling you appears on the screen, as shown below.
23 -On Intercom
When you transfer a call to another voice terminal and the call is unanswered,
the call returns to your voice terminal. The 2-digit intercom number of the voice
terminal from which the call is returning appears on the screen.
Trans Return -18
Program Mode
When you begin programming, the display tells you that you are in the program
mode and the intercom number of your voice terminal you are programming.
Program Mode 16
If you touch a button that has already been programmed, the display identifies
the name of the feature on that button. The example below shows that the Last
Number Redial feature has been programmed on the button you have touched.
Last Number
If the button has not been programmed, the message below appears on your
display screen.
Blank
MERLIN Plus System Features
5-67