Lucent Technologies MERLIN Plus Release 2 System Manual page 233

Privacy (on Lines
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
5-114 MERLIN Plus System Features
A and E)
The system administrator can administer the Privacy feature for Line A and/or
Line E so that no one in the system can bridge onto or monitor these lines while
a device plugged into the Aux jack is off-hook on Line A or Line E.
(See "Auxiliary Lines.")
This feature is used for a modem, facsimile machine, or other equipment
connected to the line through an auxiliary (AUX) jack on the control unit.
This Privacy must be administered and therefore is a different feature than the
Privacy feature that people can program for their voice terminals.
If your responsibilities do not include system administration, skip this
information.
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *57.
2
The green light goes on next to those lines that cannot be bridged or monitored.
If you want to change the Privacy setting of either Line A or Line E, touch
3
the line button until the green light next to it shows the setting you want:
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
T
Administer
None
None
Green light on = the line is private
Green light off = the line can be monitored
555-1234
57
P