Lucent Technologies MERLIN Plus Release 2 System Manual page 258

ADMINISTRATION
Follow the administration procedure under "Automatic System Access" in this
section, for ASA jack assignments. If your responsibilities do not include
administration, skip this information.
SA Line Groups
To add lines that can be answered by SA:
Enter administration mode by sliding T/P to P and touching Administer.
1
Dial *75.
2
Touch the incoming line button that you are adding to or removing from the
3
feature.
Green light on = line can be answered by SA
Green light off = line cannot be answered by SA
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
Number of Rings
To change the number of rings (the default is two rings) before SA
answers a call:
Slide the T/P switch to P and touch Administer.
1
Dial *764 plus the number of rings (between 0 and 9) before the SA feature
2
picks up the call.
If the number of rings is set to 0, the voice terminal will not ring,
NOTE:
and the calls will be immediately answered by SA.
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
4
T P
Administer
555-1234
75
Administer
7640-
7649
MERLIN Plus System Features
T P
Administer
T P
5-139