Lucent Technologies MERLIN Plus Release 2 System Manual page 88

3-32 Line Assignments for Voice Terminals
System Answer (SA)
If there is an "I" entered in this row, perform the following procedure to
administer the incoming System Answer line(s):
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *75 for the System Answer incoming line group.
2
Touch the line buttons until the green lights show the assignments
3
you want.
Green light on =
Green light off =
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
If you entered a number other than 2 in the "Ring Interval" column for SA,
follow the procedure below to change the ring interval for
incoming SA calls:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *764 plus the number of rings (0 through 9).
2
If 0 is selected, the voice terminal will not ring, and calls will be
NOTE:
answered immediately.
Touch Administer.
3
The console beeps twice.
Continue to administer the system, or leave administration mode.
4
If you put an entry in the column headed "Modify Message" for SA, follow
the procedure below:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *77 and the message number desired:
2
=
0 No voice message; call is placed on hold immediately
=
1 Message says, "Please hold"
=
Message says, "Please hold. Your call
2
will be handled momentarily."
Touch Administer.
3
Continue to administer the system, or leave administration mode.
4
This concludes outside line administration. You can go on now to
"Systemwide Options," or you can leave further administration for another
time.
line is assigned to SA
line is not assigned to SA