Lucent Technologies MERLIN Plus Release 2 System Manual page 69

MUSIC-ON-HOLD
BACKGROUND MUSIC
If you specified another duration (0, or 2 through 9) follow this procedure:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *83.
2
Dial one digit from 0 to 9 for the number of minutes.
3
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
If you have an optional audio source and want to control the volume through
system administration, locate the column headed "Music-on-Hold" on the
System Configuration Form, then dial the appropriate code given in the
procedure below:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial one of the following codes to set the volume you prefer:
2
> Dial *12 to turn off Music-on-Hold.
> Dial *13 to set the volume to low.
> Dial *14 to set the volume to medium.
> Dial *15 to set the volume to high.
Touch Administer.
3
The console beeps twice.
Continue to administer the system, or leave administration mode.
4
If you have an optional audio source connected to the Music-on-Hold jack and
an optional loudspeaker paging system, you can regulate the volume of
background music with a dial code in system administration. Locate the column
headed "Background Music" on the System Configuration Form, then dial the
appropriate code given in the procedure below:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial one of the following codes to set the volume you prefer:
2
> Dial *16 to turn off the background music.
> Dial *17 to set the volume to low.
> Dial *18 to set the volume to medium.
> Dial *19 to set the volume to high.
Touch Administer.
3
The console beeps twice.
Continue to administer the system, or leave administration mode.
4
Basic Administration 3-13