Lucent Technologies MERLIN Plus Release 2 System Manual page 195

PROGRAMMING
HOW TO USE
5-76 MERLIN Plus System Features
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
Administer
To program a Group Page button for your voice terminal:
Label the button Group Page plus a group number.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *91 plus a Group Page code:
4
70 = Page-All (all voice terminals in the system)
71 = group 1
72 = group 2
Slide the T/P switch to the center position.
5
T P
Grp. Page
Group 2
You can use a programmed button or a dial code to access this feature.
To use a Group Page button to make an announcement through a group of
voice terminal speakers:
Touch the Group Page button for the group you want to page.
1
When you hear a beep, lift your handset and make the announcement.
2
If you don't lift your handset to make the announcement and another
NOTE:
BIS terminal is nearby, you may hear a loud squeal from your
voice terminal.
Grp. Page
Group 2
71 or 72
T P
70-72
91
Drop
T P