Lucent Technologies MERLIN Plus Release 2 System Manual page 152

ADMINISTRATION
If your responsibilities do not include system administration, skip this
information.
Call Forwarding Line Groups
At startup, none of the system's outside lines are assigned to the CF incoming or
outgoing line group. To use this feature
To use Call Forwarding with the MERLIN Attendant, you should have
NOTE:
one outgoing line for each incoming line in every Call Forwarding line
group.
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial the code for the type of line group list you want to administer:
2
> CF incoming line group, dial *51
> For a CF outgoing line group, dial *52
Touch the line buttons until the green lights show the makeup you want for
3
the line group.
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
Administer
must assign line(s) to each group.
YOU
Green light on = line is assigned to the group
Green ligh off = line is not assigned to the group
Green light on = line is assigned to the group
Green light off = line is not assigned to the group
51 or 52
T P
MERLiN Plus System Features
555-1234
5-33