Lucent Technologies MERLIN Plus Release 2 System Manual page 274

Toll Prefix Setting
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
In most telephone systems people must dial a toll prefix (a 1 or a 0) before they
dial an area code and telephone number. When the MERLIN Plus system is
installed, it is set for dialing a toll prefix. If people in your system don't need to
dial a toll prefix, the system administrator must set the system for dialing the
area code only.
None
If your responsibilities do not include system administration, skip this
information. To administer the system so people can dial an area code and
telephone number without a toll prefix:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *37.
2
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
4
T P
Administer
To change the system setting so that people must dial a toll prefix before an
area code and a telephone number:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *36.
2
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
4
T P
Administer
None
Ask your administrator whether you need to dial a toll prefix
(a 1 or a 0) before you dial an area code and a telephone number.
Administer
37
Administer
36
MERLIN Plus System Features
T P
T P
5-155