Lucent Technologies MERLIN Plus Release 2 System Manual page 74

VOICE TERMINAL
TEMPLATES
3-18 Basic Administration
If you have entered a number 1 through 4 under the "Template" column of your
"Voice Terminal" form, use the following procedure to assign the template to the
voice terminal:
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *10 followed by the option number of the template:
2
Touch the Auto Intercom button or dial the intercom number of the source
3
voice terminal(s).
The console beeps twice after each voice terminal is administered a template.
Touch Administer.
4
The console beeps twice.
Label the target voice terminal buttons with the corresponding features as
5
shown in Figures 3-4, 3-5, 3-6, and 3-7.
Features previously administered on a voice terminal that do not
NOTE:
appear on the template still apply, such as Voice Announcement
Enable/Disable and Personalized Ring.
Continue to administer the system, or leave administration mode.
6
1 = Clear Template
2 = Dialer Template
3 = Feature Template
4 = Receptionist/Secretary Template