Lucent Technologies MERLIN Plus Release 2 System Manual page 194

Perform the appropriate procedure:
3
> Touch the appropriate Auto Intercom button(s) until the green light
beside it shows the paging group assignment you prefer.
Green light on = voice terminal is assigned to the group
Green light off = voice terminal is not assigned to the group
> If you do not have an Auto Intercom button for the voice terminal you
want to add or remove from the paging group, dial a code from the chart
below that corresponds with the voice terminal.
If the intercom
number is:
Intercom 10
Intercom 11
Intercom 12
Intercom 13
Intercom 14
Intercom 15
Intercom 16
Intercom 17
Intercom 18
Intercom 19
Touch Administer.
4
The console beeps twice.
Follow steps 2 through 4 for each paging group you want to administer.
5
Leave administration mode by sliding the T/P switch to the center position.
6
T P
Administer
Administer
If you want to clear all entries from group 1 or from group 2:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *71 for group 1 or *72 for group 2.
2
Touch Drop.
3
If the intercom
number is:
Dial this code:
#22
#21
#20
#19
#18
#17
#16
#15
#14
#13
71 or 72
T P
MERLIN Plus System Features
Dial this code:
Intercom 20
Intercom 21
Intercom 22
Intercom 23
Intercom 24 #07
Intercom 25 #08
Intercom 26 #09
Intercom 27 #10
Intercom 28 #11
#12
Intercom 29
Susan 15
#03
#04
#05
#06
5-75