Lucent Technologies MERLIN Plus Release 2 System Manual page 261

System Feature Report
DESCRIPTION
CONSIDERATIONS
5-142 MERLIN Plus System Features
(SFR)
This feature is used with a MERLIN Plus system data collector and an
NOTE:
AT&T 475/476 or 572/573 printer or equivalent.
If the system administrator needs to verify the features administered to the
system or needs a written copy of the lines and features on each voice terminal,
he or she can use the data collector and the printer to print a System Feature
Report. This report lists both systemwide features and programmed features and
lines on individual voice terminals.
The system features that can be printed on the System Feature Report are:
Disallowed List assignments for each voice terminal.
Allowed List assignments for each voice terminal
Transfer Return Interval
Call Report settings, such as the minimum call duration of a call for which
the Call Report feature will print information
System Speed Dial numbers
Automatic System Access (ASA) administration
The voice terminal features that can be printed on the System Feature Report are:
The intercom number of the voice terminal
The voice terminal model type
Optional accessories used with the voice terminal
Voice Announcement Enable/Disable
Automatic Line Selection sequences
The lines and features assigned to all buttons on the voice terminal
Figure 5-3 shows a printout of a typical SFR.
The System Feature Report feature can be accessed only from the
administrator/attendant console.
If the system administrator wants to have the date and time on the System
Feature Report, the administrator can set these options on the control unit when
he or she administers the date and time for the Call Report feature.
(See "Call Report.")
The system administrator can connect the data collector and the printer to any
voice terminal jack in the system, except jack 10. However, if the printer and
data collector have already been assigned to a voice terminal jack for the
Call Report feature, usually jack 19, it is best to use the same jack assignment for
the System Feature Report.