Lucent Technologies MERLIN Plus Release 2 System Manual page 263

ADMINISTRATION
5-144 MERLIN Plus System Features
If your responsibilities do not include system administration, skip this
information.
To set the date and the time, to assign a voice terminal jack for the System
Feature Report, and to print or to cancel a report, use the following procedures.
The Date and the Time
(If you have already set the date and time for the
Call Report feature, you don't have to do it again.)
To set today's date:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *80.
2
Dial two digits for the month (01 through 12).
3
Dial two digits for the day (01 through 31).
4
Dial two digits for the year (00 through 99).
5
For example, if the date is May 16, 1986, dial *80 05 16 86.
Touch Administer.
6
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
7
T P
Administer
T
Administer
To set the current time:
Enter administration mode
1
Administer.
Dial *81.
2
Dial two digits for the hour (00 through 23).
3
Dial two digits for the minute (00 through 59).
4
For example, if the time is 3:25 A.M., dial *81 03 25; if the time is 3:25 P.M.,
dial *81 15 25.
Touch Administer.
5
The console beeps twice.
6 Leave administration mode by sliding the T/P switch to the center position.
T P
Administer
T
Administer
80 month
P
by sliding the T/P switch to P and touching
01 hour minute
P
day year