PROGRAMMING
HOW TO USE
You do not need to program Option A.
To program Option B:
Label the button Call Pickup.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *85.
4
Slide the T/P switch to the center position.
5
T
P
Call
Pickup
To
program Option C:
Label the button Call Pickup plus an intercom number.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
Touch the button you want to program.
3
Dial *85 plus an intercom number.
4
Slide the T/P switch to the center position.
5
T
P
Call
Pickup 18
You can use a programmed button or a dial code to pick up an intercom or
outside call at any other voice terminal in the system.
To pickup a call ringing at any other voice terminal using Option A:
Touch Speakerphone or lift your handset.
1
Dial #3.
2
Dial the intercom number of the voice terminal where the call is ringing.
3
Speaker-
phone
T
85
85
Icom no.
Icom no.
# 3
MERLIN Plus System Features
P
T
P
5-41