Lucent Technologies MERLIN Plus Release 2 System Manual page 256

HOW TO USE
Stop
Program a stop into a dialing sequence to wait for a second dial tone. For
example, you may need to program a stop between a local telephone number and
an alternate long distance authorization code.
Dial the local telephone number (seven digits).
1
Touch Drop (Stop).
2
Dial the authorization code (five or six digits).
3
Drop
Stop
tel. no.
Switchhook Flash
Program a switchhook flash at
you may need to program a button with a PBX, Centrex, or Custom Calling
feature code that calls for a switchhook flash.
Touch Recall.
1
Touch Hold (Pause).
2
Dial the PBX or Centrex dial code sequence that gives you access to the
3
feature you want to program.
Recall
Touch-Tone Enable
Program Touch-Tone Enable into a dialing sequence on a line with rotary signal.
For example, you may need to use a credit card authorization service.
Touch Transfer.
1
Dial the credit card authorization code.
2
Transfer
If your MERLIN Plus system works behind a PBX or a Centrex system,
or you are using the Custom Calling features, follow these directions:
When PBX, Centrex, or Custom Calling feature instructions tell you to dial a
1
"#," dial a second "#." For example, if the instructions tell you to dial #4567,
you must actually dial ##4567 in order to use the feature with the
MERLIN Plus system.
If your PBX, Centrex, or Custom Calling feature instructions tell you to use a
stop, touch Drop instead and for a switchhook flash, touch Recall instead.
code
the beginning of a dialing sequence. For example,
Hold
Pause
code
code
MERLIN Plus System Features 5-137