Lucent Technologies MERLIN Plus Release 2 System Manual page 71

Changing the Busy Buster (BB) jack assignment:
If you are going to use the Call Report or System Feature Report option,
NOTE:
you can assign BB to the same jack as ASA by using the adapter
provided with the optional data collector or memory module.
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *35.
2
The green light goes on next to the Auto Intercom button of the jack assigned to BB.
Perform one of the following procedures:
3
> Touch the Auto Intercom button of the jack you want to assign to BB.
The green light goes off next to the old Auto Intercom button, and the green light goes on
next to the newly assigned Auto Intercom button.
> Dial the intercom number of jack you're assigning to BB.
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
Changing the Reports jack assignment for Call Report:
If you are using the same printer and data collector for producing
NOTE:
Call Reports and System Feature Reports, you must administer the new
jack assignment for both features.
Enter administration mode.
1
The red lights go on next to Administer and Restrict.
Dial *82.
2
The green light goes on next to the Auto Intercom button of the jack assigned to Call Report.
Perform one of the following procedures:
3
> Touch the Auto Intercom button of the jack you want to assign
to Call Report.
The green light goes off next to the old Auto Intercom button, and the green light goes on
next to the newly assigned Auto Intercom button.
> Dial the intercom number of jack you're assigning to Call Report.
Touch Administer.
4
The console beeps twice.
Continue to administer the system, or leave administration mode.
5
Basic Administration 3-15