Lucent Technologies MERLIN Plus Release 2 System Manual page 33

2-16 Line Assignments Form
Under "Ring Intend" in the "DXD" row . . .
Write the number of rings (0-9) before DXD calls are answered.
Callers on DXD incoming lines are prompted with the following message:
"Please dial desired extension number."
Once the caller dials the two-digit extension number (which is the two-digit
intercom number), the call is transferred to the extension and the caller hears the
following message:
You can also modify the voice message so that callers first hear the number
they've reached, followed by the request for the extension number
"You have reached [number]. Please dial desired extension
Under "Modify Message" in the "DXD" row . . .
Write in the incoming phone number if you want it added to the VSP
message.
Remote Line Access (RLA)
This ASA feature allows you to call in from outside and use a password to gain
access to one of the system's outside lines. Remote Line Access can also be
used from a remote location to change the call forwarding number. This feature
requires the assignment of at least one incoming line.
In the "RLA" row under "Line Assignments for ASA Features" . . .
Write an "I" in the column of the line(s) where incoming lines can be
used for RLA.
The system is factory set to answer RLA calls after two rings. You can change
the number of rings from 0 to 9. If the number of rings is set to 0, the voice
terminal will not ring, and calls are answered immediately by the VSP.
Under "Ring Interval" in the "RLA" row . . .
Write the number of rings (0-9) before RLA calls are answered.
"Please hold."
number."