Lucent Technologies MERLIN Plus Release 2 System Manual page 142

ADMINISTRATION
PROGRAMMING
HOW TO USE
The system administrator can administer the privacy feature for Line A and/or
Line E so that no one else in the system can bridge onto or monitor these lines
while a call is active on them. For more information, see "Privacy (on Lines
A and E)."
If you want calls that come in on the line connected to an auxiliary jack to ring at
that device but not at any other voice terminal that has the same line assigned to
it, program the other voice terminals to not ring on that line.
(See "Ringing Options.")
If you don't want calls that come in on the line connected to an auxiliary jack to
ring at that device, you will have to see if the device has a switch to turn off the
ring and set it accordingly.
None
Use the basic telephone, facsimile machine, or modem and computer connected
to the auxiliary jack as you normally would.
Plug in the auxiliary telephone whenever you want to bridge or monitor
Line A or Line E.
MERLIN Plus System Features
5-23