Lucent Technologies MERLIN Plus Release 2 System Manual page 127

PROGRAMMING
HOW TO USE
5-8 MERLIN Plus System Features
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
Adminster
Before you assign Allowed Lists to voice terminals in your system, refer to the
Call Restrictions, Allowed and Disallowed Lists Forms that you have filled out.
Then use the following procedures to assignor remove voice terminals for
access to Allowed Lists:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial a * and a 2-digit code (01 through 08) that corresponds to the list you
2
want to assign to the voice terminal.
Dial 00.
3
The green light goes on next to the Auto Intercom button for each voice terminal to which this
list is already assigned.
For example, to assign List 2 to a voice terminal, dial *0200.
Perform one of the following procedures:
4
> Touch the Auto Intercom button, if you have one, for the voice terminal
for which you are giving access or removing access to the Allowed List.
Green light on = the list is assigned to the voice terminal
Green light off = the list is not assigned to the voice terminal
> If you do not have an Auto Intercom button for the voice terminal that
you want to assign the list to or remove the list from, use the code from
the dial code chart in Section 3.
Touch Administer.
5
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
6
T P
Administer
T
Administer
None
Ask your system administrator what call restrictions, if any, he or she has
assigned to your voice terminal.
01- 08
T P
01- 08
0 0
P
Drop
John 12