Lucent Technologies MERLIN Plus Release 2 System Manual page 252

From a BIS-22 Console
If you are using a BIS-22 console, use one of the following procedures to turn on
the message light at a voice terminal:
At the administrator/attendant console, touch Send Message.
1
Follow one of these procedures:
2
> Touch an Auto Intercom button that the attendant has programmed for
the person.
> Dial a 3-character code corresponding to the Send Message button code
on the following chart.
To turn off the light, repeat the steps used to turn it on.
NOTE:
Send
Message
From a BIS-10 Console
If you are using a BIS-10 console, use the following procedure to turn on the
message light at a voice terminal:
At the administrator/attendant console, touch Send Message.
1
Dial a 3-character code corresponding to the Send Message dial code on the
2
following chart.
If the intercom
number is:
Intercom 10
Intercom 11
Intercom 12
Intercom 13
Intercom 14
Intercom 15
Intercom 16
Intercom 17
Intercom 18
Intercom 19
For example, the attendant may want to turn on the Message light at Intercom 21,
but does not have an Auto Intercom button for that person. The attendant refers
to the chart above and finds that the Send Message dial code is #04. Then from a
BIS-22 console the attendant touches Send Message and dials #04 to light the
message light.
To turn off a message light at a voice terminal, repeat the steps above.
NOTE:
Send
Message
#03-#22
Auto
Intercom
Dial this Send
Message dial If the intercom
code:
number is:
#22 Intercom 20
#21 Intercom 21
#20 Intercom 22
#19 Intercom 23
#18 Intercom 24
#17
Intercom 25
#16
Intercom 26
#15
Intercom 27
#14
Intercom 28
#13 Intercom 29
MERLIN Plus System Features
Dial this Send
Message dial
code:
#03
#04
#05
#06
#07
#08
#09
#10
#11
#12
5-133