Send Message - Lucent Technologies MERLIN Plus Release 2 System Manual

Send Message

DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
5-132 MERLIN Plus System Features
The system attendant can turn on the Message light at the voice terminals of
people in the MERLIN Plus system in order to alert them that they have a
message. (See "Message.")
The Message light at voice terminals in the system can only be turned on at the
attendant/administrator voice terminal. The alternate attendant position cannot
turn on the message light.
If your administrator/attendant console is a BIS-22 with more than ten voice
terminals on the system, the attendant can still use the Send Message feature by
following the directions below. However, he or she will not know if the light is
already on at the voice terminal.
If you've programmed Personal Speed Dial numbers, such as LND or SND, onto
Auto Intercom buttons, then you cannot use those buttons with the Send
Message feature.
5-Button voice terminals do not have a Message button.
None
None
From a BIS-34 Console
If you are using a BIS-34 console, use the following procedure to turn on the
message light at a voice terminal:
At the administrator/attendant voice terminal, touch Send Message.
1
Touch the Auto Intercom button for the person's voice terminal.
2
The red ligh next to the Auto Intercom button goes on, indicating the person's
Message light is on.
To turn off the light, repeat the steps.
NOTE:
Send
Message
Susan 15