Lucent Technologies MERLIN Plus Release 2 System Manual page 259

PROGRAMMING
5-140 MERLIN Plus System Features
Voice Message
To select a message to be played to the caller for lines answered by SA:
Enter administration mode by sliding T/P to P and touching Administer.
1
Dial *77 followed by the option desired. (Message 2 is the default):
2
0 = No voice message; call is immediately placed on hold
Message says, "Please hold."
1 =
=
Message says, "Please hold, your call will be handled momentarily."
2
If a line number is administered using *50, this message precedes
NOTE:
message 1 and 2: "You have reached . . ." where . . . is a number
entered by the system administrator in "Call Forwarding."
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch
4
T P
Administer
To program a System Answer button on a voice terminal:
Only the attendant or the alternate attendant can have a System Answer
NOTE:
button. The voice terminal does not have to be at Intercom #10.
Label the button "System Answer."
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannel place or receive calls.
Touch System Answer.
3
Dial the time-digit code *58.
4
Slide the T/P switch to the center position.
5
T P
System
Answer
to the center position.
Administer
770-
772
T P
58
T P