Lucent Technologies MERLIN Plus Release 2 System Manual page 244

When you have finished responding to the voice prompts, you will hear
3
normal call-progress tones (ringing, busy signal, fast busy signal, etc.).
Complete your call as usual.
4
If the system is in either CF or DXD mode, you can gain access to a line in the
RLA outgoing line group from a remote location by following this procedure.
Depending on the mode the system is in, dial the telephone number for a line
1
in either the CF or the DXD incoming line group.
When the call is answered, the VSP gives the appropriate message.
During the voice message, dial *#*.
2
The VSP begins prompting you through the RLA procedure
Respond appropriately to the voice prompts until you hear normal
3
call-progress tones (ringing, busy signal, fast busy signal, etc.).
Complete your call as usual.
4
MERLIN Plus System Features
5-125