Lucent Technologies MERLIN Plus Release 2 System Manual page 310

ADMINISTRATION
Considerations for CO line connection:
If the paging unit is connected to a CO port but is administered as a paging port,
it is treated differently than a CO line, and has the following restrictions:
An auxiliary jack cannot be used as a paging port.
Conferencing to this paging port or adding this port to a conference call is
prohibited.
Transferring of the paging port is prohibited.
Bridging onto the paging port is prohibited.
No Call Reports can be generated for this line.
No Call Restrictions apply, therefore, even outward restricted voice terminals
could use this line for toll calls.
The volume is controlled by the loudspeaker paging system only.
Unlike the page jack connection, the CO connection provides no signal to
alert you when the loudspeaker paging system has been activated.
If you want to save available feature buttons for other features, use the dial code
instead of programming a Loudspeaker Page button.
If your responsibilities do not include system administration, skip this
information.
Administration for the Page Jack connection:
To set the volume of background music, or to turn the music off, dial one of the
following codes:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial one of the following codes to set the volume you prefer
2
> Dial *16 to turn off the background music.
> Dial *17 to set the volume to low.
> Dial *18 to set the volume to medium.
> Dial *19 to set the volume to high.
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
4
Accessory Equipment 6-19