Lucent Technologies MERLIN Plus Release 2 System Manual page 241

ADMINISTRATION
5-122 MERLIN Plus System Features
Call Forwarding should be used only at night if your system has one or more
MERLIN Attendants, and you do not have dedicated lines for Call
Forwarding. To use Call Forwarding at night with the MERLIN Attendant,
activate this feature before leaving the office at the end of the business day,
and deactivate it as soon as your business day begins.
The Call Forwarding/Remote Line Access Disconnect Timer should be used
in conjunction with CF if your Central Office (CO) does not provide a
"forward disconnect" signal to your MERLIN Plus system. (See "Call
Forwarding/Remote Line Access Disconnect Timer" in this section.)
An outward restricted user can only dial numbers that are present in an
allowed list.
If your responsibilities do not include system administration, skip this
information.
RLA Line Groups
At startup, none of the system's outside lines are assigned to the RLA line group.
To use this feature, you will need to assign line group(s) as follows:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *54 for the incoming line group.
2
The green lights go on next to the buttons for the lines currently assigned to
the list.
Green light on = line is assigned to the group
Green lighl off = line is not assigned to the group
Touch line buttons until the green lights show the makeup you want for the
3
line group.
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
5
T P
Administer
T
Administer
555-1234
54
P